Home
HYPRO structure Traditional structure
HYPRO Bearing System enhances the traditional magnetic levitation fan device and eliminates parts such as rubber O-rings and washers. In the long HYPRO Bearing System enhances the traditional magnetic levitation fan device and eliminates parts such as rubber O-rings and washers. In the long and continuous operation, impeller shaft is prone to seizure due to friction resulting from sulfides generated by the lubricating oil and rubber during the high temperature rotation. The HYPRO Bearing structure has improved this issue.
Although furnished with copper ferroalloy HYPRO bearing which has better friction and wear-proof, there are still fine gaps at the upper opening of shaft bush and in the rubber oil cap beside the label. The lubricating oil is vital to the bearing system, yet these fine gaps are prone to let the lubricating oil slowly seep out of the system when evaporated because the bearing runs in high temperature and heavy friction. This results in shortened service life of the fan without reaching the expected lifespan, as well as the gradually increasing noise of metallic friction.
ADDA has launched a brand new Hypro PLUS structure to tackle with this issue, providing customers with a better choice of heat dissipation fans with longer lifespan, lower price in comparison with ball bearing ones, and lower noise.
Although furnished with copper ferroalloy HYPRO bearing which has better friction and wear-proof, there are still fine gaps at the upper opening of shaft bush and in the rubber oil cap beside the label. The lubricating oil is vital to the bearing system, yet these fine gaps are prone to let the lubricating oil slowly seep out of the system when evaporated because the bearing runs in high temperature and heavy friction. This results in shortened service life of the fan without reaching the expected lifespan, as well as the gradually increasing noise of metallic friction.
ADDA has launched a brand new Hypro PLUS structure to tackle with this issue, providing customers with a better choice of heat dissipation fans with longer lifespan, lower price in comparison with ball bearing ones, and lower noise.
Hypro PLUS Structure
The innovative oil HYPRO PLUS protection system comprises long lifespan abrasion durable bearing and Closed-up single wear-washer design, together with U” Bushing/ Holder oil sealing outlet and inlet metal oil cap, eliminating seepage and evaporation of the lubricating oil and greatly enhanced oil protection and prolonged lubricant service time.
In the shaft, the closed up design structure of the wear resistant washer enabled floating magnet rail operation of fan blades and the integral oil protection design, which in turn results in substantially improved fan efficiency not only increasing the guaranteed lifespan but also greatly lowering the running noise which used to be gradually increasing due to the loss of lubricating oil.
In the shaft, the closed up design structure of the wear resistant washer enabled floating magnet rail operation of fan blades and the integral oil protection design, which in turn results in substantially improved fan efficiency not only increasing the guaranteed lifespan but also greatly lowering the running noise which used to be gradually increasing due to the loss of lubricating oil.
Oil protection - Comparison of oil protection
| Under the high temperature and heavy friction rotation of the shaft, together with fine gaps on both ends of the double side structure design, the lubricating oil tends to evaporate and escape from the upper and lower ends and is difficult to remain in the bearing. This results in gradual diminishing of the lubricating oil therefore gradually increased noise and heat generation, so that the fan fails to fully/smoothly reach its expected lifespan. | Under the high temperature and heavy friction rotation of the shaft, fine gaps no longer exist in the innovative HyproPLUS structure and the lubricating oil no longer escapes from the upper and lower ends. Therefore the lubricating oil is substantially retained without evaporating and seeping, enabling the shaft to be lubricated properly with no gradual increase in friction noise, to run smoothly and successfully achieving the expected lifespan. |
